988 ExtremeWare Software 7.3.0 Command Reference Guide
EAPS Commands
disable eaps
disable eaps {<name>}
Description
Disables the EAPS function for a named domain or for an entire switch.
Syntax Description
Default
Disabled for the entire switch.
Usage Guidelines
None.
Example
The following command disables the EAPS function for entire switch:
disable eaps
The following command disables the EAPS function for the domain “eaps-1”:
disable eaps eaps-1
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on the “i” series platforms.
name Specifies the name of an EAPS domain.
To Next Page
Loading...