Extreme Networks ExtremeWare User Manual

440 ExtremeWare Software 7.3.0 Command Reference Guide
SLB Commands
configure flow-redirect add next-hop
configure flow-redirect <flow redirect> add next-hop <ip address>
Description
Adds the next hop host (gateway) that is to receive the packets that match the flow redirect policy.
Syntax Description
Default
N/A.
Usage Guidelines
This command also automatically enables ping-based health checking.
Example
The following command adds the next hop of 10.2.1.20 to the flow redirect policy named “http_flow”:
configure flow-redirect http_flow add next-hop 10.2.1.20
History
This command was available in ExtremeWare 6.1.4.
Platform Availability
This command is available on all platforms.
flow redirect Specifies a flow redirect policy.
ip address Specifies an IP address.

Extreme Networks ExtremeWare Specifications

General

Vendor	Extreme Networks
Compatibility	Extreme Networks switches and routers
Type	Network Operating System
Functionality	Network management
User Interface	CLI
Protocols Supported	OSPF, BGP, RIP, VLAN, STP
Features	QoS, Security Features