enable slb vip sticky-persistence
ExtremeWare Software 7.3.0 Command Reference Guide 575
enable slb vip sticky-persistence
enable slb vip [all | ipaddress <ip address> | <vip name>]
sticky-persistence {netmask <netmask>}
Description
Enables the sticky persistence feature and specifies the client address mask.
Syntax Description
Default
Sticky persistence is disabled by default.
Usage Guidelines
To disable sticky persistence, use the following command:
disable slb vip sticky-persistence
Example
The following command enables sticky persistence for the virtual server “ftp_vip”:
enable slb vip ftp_vip sticky-persistence
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
all Specifies all virtual servers.
ip address Specifies an IP address.
vip name Specifies a virtual server.
netmask Specifies a netmask.
To Next Page
Loading...