show log configuration target
ExtremeWare Software 7.3.0 Command Reference Guide 723
show log configuration target
show log configuration target {console-display | memory-buffer | nvram |
session | syslog <host name/ip> {: <udp-port>}[local0 ... local7]}
Description
Displays the log configuration for the specified target.
Syntax Description
Default
If no options are specified, the command displays the configuration for the current session and console
display.
Usage Guidelines
This command displays the log configuration for the specified target. The associated filter, severity,
match expression, and format is displayed.
Example
The following command displays the log configuration:
show log configuration target
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
console-display Show the log configuration for the console display.
memory-buffer Show the log configuration for volatile memory.
nvram Show the log configuration for NVRAM.
session Show the log configuration for the current session (including console display).
syslog Show the configuration for the specified syslog target.
host name/ip Specifies the syslog host name or IP address.
udp-port Specifies the UDP port number for the syslog target.
local0 ... local7 Specifies the local syslog facility.
To Next Page
Loading...
Need help?
General
