configure ipxrip vlan delay
ExtremeWare Software 7.3.0 Command Reference Guide 1561
configure ipxrip vlan delay
configure ipxrip vlan [<vlan name> | all] delay <msec>
Description
Configures the time between each IPX/RIP packet within an update interval.
Syntax Description
Default
The default setting is 55 milliseconds.
Usage Guidelines
IPX/RIP is automatically enabled when a NetID is assigned to the VLAN.
Example
The following command configures a delay of 80 milliseconds:
configure ipxrip vlan accounting delay 80
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
vlan name Specifies a VLAN name.
all Specifies all VLANs.
msec Specifies the delay time in milliseconds.
To Next Page
Loading...