178 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Managing the Switch
enable snmp traps
enable snmp traps
Description
Turns on SNMP trap support.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
An authorized trap receiver can be one or more network management stations on your network. The
switch sends SNMP traps to all trap receivers.
Example
The following command enables SNMP trap support on the switch:
enable snmp trap
History
This command was first available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...