1086 ExtremeWare Software 7.3.0 Command Reference Guide
ESRP Commands
configure vlan delete track-rip
configure vlan <vlan name> delete track-rip
Description
Disables RIP route tracking for an ESRP-enabled VLAN.
Syntax Description
Default
No RIP route tracking.
Usage Guidelines
None.
Example
The following command disables RIP route failure tracking for VLAN esrp-1:
configure vlan esrp-1 delete track-rip
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
vlan name Specifies an ESRP-enabled VLAN name.
To Next Page
Loading...