1336 ExtremeWare Software 7.3.0 Command Reference Guide
IGP Commands
disable isis overload
disable isis [level-2 | area <isis area identifier>] overload {at-startup}
Description
Disables the setting of the overload bit in the LSP originated by the system in the level 2 subdomain or
level 1 area.
Syntax Description
Default
The default setting is disabled.
Usage Guidelines
The
at-startup
option disables setting the overload bit at system startup time.
Example
The following command disables setting the overload bit for the level 1 area a1:
disable isis area a1 overload
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
level-2 Specifies the level 2 subdomain.
isis area identifier Specifies a level 1 area.
at-startup Specifies that setting the overload bit is disabled at startup.
To Next Page
Loading...
Need help?
General
