configure slb proxy-client-persistence
ExtremeWare Software 7.3.0 Command Reference Guide 505
configure slb proxy-client-persistence
configure slb proxy-client-persistence [add | delete] <ip
address>/<netmask>
Description
Configures a client subnet that should be treated as one persistent entity.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to force all clients from the specified proxy array to connect to the same physical
server.
Example
The following command specifies that the subnet 10.10.10.20/24 should be treated as a single, persistent
entity:
configure slb proxy-client-persistence add 10.10.10.20/24
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
ip address/netmask Specifies an IP address and netmask.
To Next Page
Loading...