1238 ExtremeWare Software 7.3.0 Command Reference Guide
IP Unicast Commands
show iparp
show iparp {<ip address> | <mac_address> | vlan <vlan name> | permanent}
Description
Displays the IP Address Resolution Protocol (ARP) table. You can filter the display by IP address, MAC
address, VLAN, or permanent entries.
Syntax Description
Default
Show all entries.
Usage Guidelines
Displays the IP ARP table, including:
• IP address
• MAC address
• Aging timer value
• VLAN name, VLAN ID and port number
• Flags
Example
The following command displays the IP ARP table:
show iparp 10.1.1.5/24
History
This command was available in ExtremeWare 2.0.
This command was modified in ExtremeWare 6.2.1 to provide the MAC address option.
Platform Availability
This command is available on all platforms.
ip address Specifies an IP address.
mac_address Specifies a MAC address.
vlan name Specifies a VLAN name.
permanent Specifies permanent entries.
To Next Page
Loading...