Extreme Networks ExtremeWare - Show Ospf Lsdb Area Lstype

show ospf lsdb area lstype
ExtremeWare Software 7.3.0 Command Reference Guide 1383
show ospf lsdb area lstype
show ospf lsdb area [all | <area identifier>[/<len>] | detail | interface |
lsid <id>[/<len>] | lstype [all | as-external | external-type7 | network |
opaque-area | opaque-global | opaque-local | router | summary-asb
|summary-net| routerid <id>[/<len>] | stats | summary | vlan <vlan name>]
Description
Displays a table of the current LSDB.
Syntax Description
Default
Display in summary format.
Usage Guidelines
ExtremeWare provides several filtering criteria for the show ospf lsdb command. You can specify
multiple search criteria and only results matching all of the criteria are displayed. This allows you to
control the displayed entries in large routing tables.
A common use of this command is to omit all optional parameters, resulting in the following shortened
form:
show ospf lsdb
The shortened form displays all areas and all types in a summary format.
You can filter the display using either the area ID, the remote router ID, or the link-state ID. The default
setting is
all with no detail. If detail is specified, each entry includes complete LSA information.
Example
The following command displays all areas and all types in a summary format:
show ospf lsdb
all Specifies all OSPF areas.
area identifier Specifies an OSPF area.
detail Specifies to display all fields of matching LSAs in a multi-line format.
interface Specifies to display interface types.
id Specifies an LS ID.
id Specifies a router ID.
stats Specifies to display the number of matching LSAs, but not any of their
contents.
summary Specifies to display several important fields of matching LSAs, one line per
LSA.
vlan name Specifies a VLAN name.