disable icmp useredirects
ExtremeWare Software 7.3.0 Command Reference Guide 1195
disable icmp useredirects
disable icmp useredirects
Description
Disables the modification of route table information when an ICMP redirect message is received.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
This option only applies to the switch when the switch is not in routing mode.
Example
The following command disables the changing of routing table information:
disable icmp useredirects
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...