enable diffserv examination ports
ExtremeWare Software 7.3.0 Command Reference Guide 401
enable diffserv examination ports
enable diffserv examination ports [<portlist> | all]
Description
Enables the Diffserv field of an ingress IP packet to be examined in order to select a QoS profile.
Syntax Description
Default
Disabled.
Usage Guidelines
None.
Example
The following command enables Diffserv examination on selected ports:
enable diffserv examination ports 3,5,6
History
This command was available in ExtremeWare 6.0.
Platform Availability
This command is available on all platforms.
portlist Specifies a list of ports or slots and ports to which the parameters apply. May
be in the form 1, 2, 3-5, 2:5, 2:6-2:8.
all Specifies that Diffserv examination should be enabled for all ports.
To Next Page
Loading...
Need help?
General
