1992 ExtremeWare Software 7.3.0 Command Reference Guide
Wireless Commands
clear wireless ports interface client-history
clear wireless ports [<portlist> | all] interface [1 | 2] client-history
[<mac-address> | all]
Description
Clears the counters for a specific MAC address or for all clients.
Syntax Description
Default
N/A.
Usage Guidelines
Although this command clears the counters, client entries are not removed from the client information
database.
Example
The following example clears the client-history counters on all ports and interface 1:
clear wireless ports all interface 1 client-history all
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
all Specifies all ports.
interface Specifies an interface: 1 or 2.
To Next Page
Loading...