Extreme Networks ExtremeWare - Disable Isis Export

1332 ExtremeWare Software 7.3.0 Command Reference Guide
IGP Commands
disable isis export
disable isis [level-2 | area <isis area identifier>] export [bgp | i-bgp |
e-bgp | direct | rip | static | vip | ospf | ospf-intra | ospf-inter |
ospf-extern1 | ospf-extern2]
Description
Disables the redistribution of non-IS-IS routes from the kernel routing table into a IS-IS level 2
subdomain or level 1 area:
Syntax Description
Default
The default setting is disabled.
Usage Guidelines
All the redistributed routes are associated with the same metric and metric type.
Example
The following command disables redistribution of OSPF routes for a level 2 subdomain:
disable isis level-2 export ospf
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
level-2 Specifies a level 2 subdomain
isis area identifier Specifies an IS-IS level 1 area
bgp Specifies BGP routes.
i-bgp Specifies I-BGP routes.
e-bgp Specifies E-BGP routes.
direct Specifies direct routes.
rip Specifies RIP routes.
static Specifies static routes.
vip Specifies VIP routes.
ospf Specifies OSPF routes.
ospf-intra Specifies Intra OSPF routes.
ospf-inter Specifies Inter OSPF routes.
ospf-extern1 Specifies Extern 1 OSPF routes.
ospf-extern2 Specifies Extern 2 OSPF routes.