1438 ExtremeWare Software 7.3.0 Command Reference Guide
BGP Commands
configure bgp peer-group remote-AS-number
configure bgp peer-group <peer group> remote-AS-number <number>
Description
Configures the remote AS number for a peer group and all the neighbors of the peer group.
Syntax Description
Default
N/A.
Usage Guidelines
Changes made to the parameters of a peer group are applied to all neighbors in the peer group.
Modifying the following parameters automatically disables and enables the neighbors before changes
take effect:
• remote-as
• timer
• source-interface
• soft-in-reset
• password
Example
The following command configures the remote AS number for the peer group outer and its neighbors:
configure bgp peer-group outer remote-AS-number 65001
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all platforms.
peer group Specifies a peer group.
number Specifies a remote AS number.
To Next Page
Loading...