882 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
disable ssh2
disable ssh2
Description
Disables the SSH2 server for incoming SSH2 sessions to switch.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
SSH2 session options (access profile and non-default port setting) are not saved when SSH2 is disabled.
To view the status of SSH2 Telnet sessions on the switch, use the
show management
command. The
show management
command displays information about the switch including the enable/disable state
for SSH2 Telnet sessions.
SSH2 client connections can still be initiated from the switch when the SSH2 server is disabled.
Example
The following command disables the SSH2 server:
disable ssh2
History
This command was first available in ExtremeWare 6.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...