206 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Managing the Switch
show snmpv3 notify
show snmpv3 notify {{hex} <notify name>}
Description
Display the notifications that are set. This command displays the snmpNotifyTable.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to display entries from the SNMPv3 snmpNotifyTable. This table lists the notify tags
that the agent will use to send notifications (traps).
If no notify name is specified, all the entries are displayed.
Example
The following command displays the notify table entry for N1:
show snmpv3 notify N1
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
param name Specifies the parameter name associated with the target.
To Next Page
Loading...