790 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
configure netlogin base-url
configure netlogin base-url <url>
Description
Configures the base URL for Network Login.
Syntax Description
Default
The base URL default value is “network-access.net”.
Usage Guidelines
When you login using a web browser, you are redirected to the specified base URL, which is the DNS
name for the switch.
You must configure a DNS name of the type “www.xx…xx.xxx” or “xx…xx.xxx”.
This command applies only to the web-based authentication mode of Network Login.
Example
The following example configures the base URL as
access.net
:
configure netlogin base-url access.net
History
This command was first available in ExtremeWare 7.0.
Platform Availability
This command is available on all platforms.
url Specifies the base URL for Network Login.
To Next Page
Loading...