1156 ExtremeWare Software 7.3.0 Command Reference Guide
IP Unicast Commands
configure iparp delete
configure iparp delete <ip address>
Description
Deletes an entry from the ARP table. Specify the IP address of the entry.
Syntax Description
Default
N/A.
Usage Guidelines
Removes any IP ARP entry (dynamic or permanent) from the table. The
ip address
is used to match
the IP interface address to locate a suitable interface.
Example
The following command deletes an IP address entry from the ARP table:
configure iparp delete 10.1.2.5
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
ip address Specifies an IP address.
To Next Page
Loading...