configure bgp peer-group weight
ExtremeWare Software 7.3.0 Command Reference Guide 1443
configure bgp peer-group weight
configure bgp peer-group <peer group> weight <number>
Description
Configures the weight for the peer group and all the neighbors of the peer group.
Syntax Description
Default
N/A.
Usage Guidelines
BGP selects routes based on the following precedence (from highest to lowest):
• higher weight
• higher local preference
• shortest length (shortest AS path)
• lowest origin code
• lowest MED
• route from external peer
• lowest cost to Next Hop
• lowest routerID
Example
The following command configures the weight for the peer group outer and its neighbors:
configure bgp peer-group outer weight 5
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all platforms.
peer group Specifies a peer group.
number Specifies a BGP peer group weight.
To Next Page
Loading...