1572 ExtremeWare Software 7.3.0 Command Reference Guide
IPX Commands
configure ipxsap vlan export-filter
configure ipxsap vlan [<vlan name> | all] export-filter [none |
access_profile]
Description
Assigns an export route filter to an ingress VLAN.
Syntax Description
Default
N/A.
Usage Guidelines
Only the network ID matching the export filter will be added to the IPX route table.
Example
The following command assigns an export route filter to ingress VLAN
accounting
:
configure ipxsap vlan accounting export-filter none
History
This command was introduced in ExtremeWare 4.0;
access-profile
s modified in version 6.1.5b20.
Platform Availability
This command is available on the all “i” series systems.
vlan name Specifies a VLAN name.
all Specifies all VLANs.
none Specifies no export filters
access_profile Specifies an access profile name.
To Next Page
Loading...