Extreme Networks ExtremeWare - Clear Ipmc Fdb

1484 ExtremeWare Software 7.3.0 Command Reference Guide
IP Multicast Commands
clear ipmc fdb
clear ipmc fdb {group <ip address> {sender <ip address> / <netmask>}}
Description
Resets the IP multicast forwarding database entry.
Syntax Description
Default
N/A.
Usage Guidelines
If no options are specified, all IP multicast forwarding database entries are cleared. This command has
an effect similar to the command
clear ipmc cache , except that the targets are the forwarding
database entries.
Example
The following command resets the IP multicast forwarding database entry:
clear ipmc fdb group 224.1.2.3 sender 10.0.0.2/24
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
ip address Specifies an IP address.
netmask Specifies a netmask.