1568 ExtremeWare Software 7.3.0 Command Reference Guide
IPX Commands
configure ipxroute delete
configure ipxroute delete [<dest_netid> | default] <next_hop_netid>
<next_hop_node_addr>
Description
Removes a static IPX route entry from the route table.
Syntax Description
Default
N/A.
Usage Guidelines
If you have defined default or static routes, those routes will remain in the configuration independent of
whether the VLAN or VLAN IP address that used them remains. You should manually delete the routes
if no VLAN IP address is capable of using them.
Example
The following command deletes a static IPX route entry to the IPX route table:
configure ipxroute delete default 0011 00:eb:2a:0b:1e:0a
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
dest_netid Specifies the destination NetID.
next_hop_id Specifies the NetID of the neighbor IPX network.
next_hop_node_addr Specifies the node address of the next IPX router.
To Next Page
Loading...