1310 ExtremeWare Software 7.3.0 Command Reference Guide
IGP Commands
configure ospf spf-hold-time
configure ospf spf-hold-time <seconds>
Description
Configures the minimum number of seconds between Shortest Path First (SPF) recalculations.
Syntax Description
Default
3 seconds.
Usage Guidelines
None.
Example
The following command configures the minimum number of seconds between Shortest Path First (SPF)
recalculations:
configure ospf spf-hold-time 6
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
seconds Specifies a time in seconds.
To Next Page
Loading...