enable ipxsap gns-reply
ExtremeWare Software 7.3.0 Command Reference Guide 1587
enable ipxsap gns-reply
enable ipxsap gns-reply {vlan <vlan name>}
Description
Enables GNS reply on one or all IPX interfaces.
Syntax Description
Default
The default setting is enabled.
Usage Guidelines
If no VLAN is specified, GNS reply is enabled on all IPX interfaces.
Example
The following command enables GNS reply for IPX VLAN
accounting
:
enable ipxsap gns-reply vlan accounting
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
vlan name Specifies a VLAN name.
To Next Page
Loading...