Extreme Networks ExtremeWare - Show Wireless Ports Interface Client-History Configuration

show wireless ports interface client-history configuration
ExtremeWare Software 7.3.0 Command Reference Guide 2081
show wireless ports interface client-history configuration
show wireless ports [<portlist> | all] interface [1 | 2] client-history
configuration
Description
Displays the current configuration of the client history and diagnostic features.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following example displays the client history and diagnostic features on port 1:25 and interface 1:
show wireless ports 1:25 interface 1 client-history configuration
The output of the command is similar to:
Intf Enabled TableSize Timeout
----------------------------------------------------------------
1:25:1 Y 128 600
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.