disable web http
ExtremeWare Software 7.3.0 Command Reference Guide 887
disable web http
disable web http
Description
Disables HTTP access to the switch on the default HTTP port (80).
Syntax Description
This command has no parameters or variables.
Default
Enabled.
Usage Guidelines
Use this command to disallow users from connecting with HTTP. Disabling HTTP access forces users to
use a secured HTTPS connection if web HTTPS is enabled. Use the following command to enable web
HTTPS:
enable web https
Example
The following command disables HTTP on the default port:
disable web http
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
To Next Page
Loading...