Extreme Networks ExtremeWare - Show Inline-Power Configuration Slot

show inline-power configuration slot
ExtremeWare Software 7.3.0 Command Reference Guide 1923
show inline-power configuration slot
show inline-power configuration slot <slotlist>
Description
Displays inline power configuration information for the specified slots.
Syntax Description
Default
N/A.
Usage Guidelines
The output displays the following inline power configuration information for the specified slots:
• Status—Indicates power status:
— Enabled: The slot is available to provide power.
— Disabled: The slot is not available to provide power.
• Cfg PSU Backup—Indicates the current setting of power source precedence:
— Internal
— None
• PSU Active—Indicates the power source currently supplying power:
— Internal
— External
• Usage Threshold—Displays the configured alarm threshold as a percentage.
• Connection Order—Displays the list of ports (1 – 32) by current connection order. (Maximum for the
Alpine module is 32 ports.)
Example
The following command displays inline power configuration information for slot 1:
show inline-power configuration slot 1
Following is sample output from this command:
Slot Status Cfg PSU Backup PSU Active Usage Threshold
1 Enabled Internal Internal 70%
History
This command was first available in ExtremeWare 7.2.
slotlist Specifies one or more slots.