Extreme Networks ExtremeWare User Manual

configure debug-trace rip-route-change
ExtremeWare Software 7.3.0 Command Reference Guide 2189
configure debug-trace rip-route-change
configure debug-trace rip-route-change <debug level> vlan <vlan name | all>
Description
This command is not currently supported.
Syntax Description
Default
The default level is 0.
Usage Guidelines
This command is not currently supported.
Example
This command is not currently supported.
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
debug level Specifies a debug level:
0 — Not currently supported.
1 — Not currently supported.
2 — Not currently supported.
3 — Not currently supported.
4 — Not currently supported.
5 — Not currently supported.
vlan name Specifies a VLAN name.
all Specifies all VLANs.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English