1270 ExtremeWare Software 7.3.0 Command Reference Guide
IGP Commands
configure isis lsp holddown interval
configure isis lsp-holddown-interval <seconds>
Description
Configures the LSP hold down interval.
Syntax Description
Default
10 seconds.
Usage Guidelines
The LSP hold down interval range is from 3 to 120 seconds.
Example
The following command configures the LSP hold down interval:
configure isis lsp-holddown-interval 20
History
This command was first available in ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
seconds Specifies the LSP hold down interval in seconds.
To Next Page
Loading...