configure ip-subnet-lookup maskbits
ExtremeWare Software 7.3.0 Command Reference Guide 789
configure ip-subnet-lookup maskbits
configure ip-subnet-lookup maskbits <length>
Description
This command changes length of IPDA SUBNET lookup mask.
Syntax Description
Default
N/A.
Usage Guidelines
For a new setting to be effective, system rebooting is needed.
Example
The following example changes the length of the IPDA subnet lookup mask to 18 bits:
configure ip-subnet-lookup maskbits 18
History
This command was first available in ExtremeWare 7.0.0
Platform Availability
This command is available on all platforms.
length Specifies the number of maskbits for the IPDA subnet lookup mask.
To Next Page
Loading...