unconfig inline-power detection ports
ExtremeWare Software 7.3.0 Command Reference Guide 1933
unconfig inline-power detection ports
unconfig inline-power detection ports <portlist>
Description
Resets the power detection scheme to the default for the specified ports.
Syntax Description
Default
N/A.
Usage Guidelines
This command resets the power detection scheme configured with the following command:
config inline-power detection [auto | discovery-test-only] ports <portlist>
Example
The following command resets the power detection scheme to its default for port 1 on slot 1:
unconfig inline-power detection ports 1:1
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available on Alpine series I/O modules only.
portlist Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.
To Next Page
Loading...