582 ExtremeWare Software 7.3.0 Command Reference Guide
SLB Commands
show slb esrp
show slb esrp
Description
Displays SLB configuration for ESRP.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
None.
Example
The following command displays the current ESRP configuration:
show slb esrp
Following is the output from this command:
VLAN Name SLB Unit Status SLB Unit(s)
servers Standby 1
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...