configure vlan delete member-vlan
ExtremeWare Software 7.3.0 Command Reference Guide 329
configure vlan delete member-vlan
configure vlan <translation vlan name> delete member-vlan [<vlan name> |
all]
Description
Deletes a member VLAN from a translation VLAN.
Syntax Description
Default
N/A.
Usage Guidelines
This command deletes a member VLAN to a translation VLAN. Use the
all
keyword to delete all the
member VLANs from the specified translation VLAN.
Example
The following command deletes the member VLAN named v101 from the translation VLAN named
v1000:
configure vlan v1000 delete member-vlan v101
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
translation vlan name Specifies a translation VLAN.
vlan name Specifies a VLAN to add to the translation VLAN.
To Next Page
Loading...