684 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Status Monitoring and Statistics
disable temperature-logging
disable temperature-logging
Description
Stops recording the system temperature in celsius for the BlackDiamond and Alpine systems to the
syslog.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
Use this command to stop recording the system temperature to the syslog.
If you already enabled temperature logging, and you want to view the current temperature of the
system, do the following:
1 Disable the temperature logging feature using the following command:
disable temperature-logging
2 Re-enable the temperature logging feature using the following command:
enable temperature-logging
3 Display the syslog using the following command:
show log
Example
The following command stops recording the system temperature to the syslog:
disable temperature-logging
History
This command was first available in ExtremeWare 6.2.2b108.
This command was not supported in ExtremeWare 7.0.
This is supported and the command syntax changed from
disable log temperature
in ExtremeWare
7.1.0.
Platform Availability
This command is available on modular switches only.
To Next Page
Loading...
Need help?
General
