unconfigure mpls qos-mapping
ExtremeWare Software 7.3.0 Command Reference Guide 1851
unconfigure mpls qos-mapping
unconfigure mpls qos-mapping [dotp-to-exp | exp-to-dot1p | lsp <lsp_name>]
Description
Restores the default values for the specified QoS mapping table.
Syntax Description
Default
N/A.
Usage Guidelines
The default contents of either QoS mapping table maps an input value of n to an output value of n.
Example
The following command restores the default values for the dot1p-to-exp QoS mapping table:
unconfigure mpls qos-mapping dot1p-to-exp
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
dot1p-to-exp Specifies dot1p-to-exp mapping.
exp-to-dot1p Specifies exp-to-dot1p mapping.
lsp_name Specifies the name of an LSP.
To Next Page
Loading...
Need help?
General
