2044 ExtremeWare Software 7.3.0 Command Reference Guide
Wireless Commands
disable wireless ports interface
disable wireless ports <portlist> interface [1 | 2]
Description
Disables the specified port interface.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to disable one of the interfaces. If both interfaces are disabled, it’s the same as using
the command:
disable wireless ports x:x
.
Example
The following command disables port 1:35 and interface 1:
disable wireless ports 1:35 interface 1
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
interface Specifies an interface: 1 or 2.
To Next Page
Loading...
Need help?
General
