Extreme Networks ExtremeWare - Configure Application Examination Ports

configure application examination ports
ExtremeWare Software 7.3.0 Command Reference Guide 1859
configure application examination ports
configure {application examination} <application name> [add | delete]
ports [<portlist> | all]
Description
Adds or deletes an existing application examination rule to or from the specified
“3”
series ports.
Syntax Description
Default
None.
Usage Guidelines
Up to 60 application examination rules can be associated with each port.
Example
The following command adds an application examination rule, TCP20, to ports 2:6 through 2-8:
configure application examination TCP20 add ports 2:6-2:8
The following command also adds an application examination rule to ports 2:6 through 2-8. The
keywords “application examination” are optional.
configure TCP20 add ports 2:6-2:8
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available on
“3”
series I/O modules only.
application name Specifies the name string associated with the rule to configure.
add Specifies to add an application examination rule to the specified ports.
delete Specifies to delete an application examination rule from the specified ports.
portlist Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.
all Specifies all
“3”
series ports.