configure mpls delete vlan
ExtremeWare Software 7.3.0 Command Reference Guide 1765
configure mpls delete vlan
configure mpls delete vlan [<vlan name> | all] {ldp | rsvp-te}
Description
Disables LDP or RSVP-TE on one or all VLANs.
Syntax Description
Default
N/A.
Usage Guidelines
Disables LDP or RSVP-TE on one or all VLANs. If not specified, both are disabled for the specified
VLAN.
Example
The following command disables RSVP-TE on vlan1:
configure mpls delete vlan vlan1 rsvp-te
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
vlan name Specifies a VLAN name.
all Specifies all VLANs.
ldp Disables LDP.
rsvp-te Disables RSVP-TE.
To Next Page
Loading...