166 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Managing the Switch
disable snmp traps port-up-down
disable snmp traps port-up-down ports [all | mgmt | <portlist>]
Description
Prevents SNMP port up/down traps (also known as link up and link down traps) from being sent from
the switch for the indicated ports.
Syntax Description
Default
Enabled.
Usage Guidelines
This command is used to disable the sending of link up and link down traps for the specified ports. To
see which ports do not have such traps disabled, use the show management command.
Example
The following command will prevent link up or link down traps from being sent for any port on the
switch (except the management port if it has one).
disable snmp traps port-up-down all
History
This command was first available in ExtremeWare 6.2.2
This command was modified to include the management port in ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
all Specifies that no link up/down traps should be sent for all ports. This does not
include the management port which must be explicitly specified.
mgmt Specifies that no link up/down traps should be sent for the management port.
This option will only appear on platforms that have a management port.
<portlist> Specifies the list of ports.
To Next Page
Loading...
Need help?
General
