show sntp-client
ExtremeWare Software 7.3.0 Command Reference Guide 211
show sntp-client
show sntp-client
Description
Displays the DNS configuration.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
Displays configuration and statistics information of SNTP client.
Example
The following command displays the DNS configuration:
show sntp-client
Following is the output from this command:
SNTP client is enabled
SNTP time is valid
Primary server: 172.17.1.104
Secondary server: 172.17.1.104
Query interval: 64
Last valid SNTP update: From server 172.17.1.104, on Wed Oct 30 22:46:03 2002
SNTPC Statistics:
Packets transmitted:
to primary server: 1
to secondary server: 0
Packets received with valid time:
from Primary server: 1
from Secondary server: 0
from Broadcast server: 0
Packets received without valid time:
from Primary server: 0
from Secondary server: 0
from Broadcast server: 0
Replies not received to requests:
from Primary server: 0
from Secondary server: 0
History
This command was first available in ExtremeWare 4.0.
To Next Page
Loading...