Extreme Networks ExtremeWare - Delete Security-Profile

delete security-profile
ExtremeWare Software 7.3.0 Command Reference Guide 865
delete security-profile
delete security-profile <name>
Description
Deletes the named security profile.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to delete the named security profile. The named profile cannot be attached to any
active ports.
To verify your configuration, use the show security-profile command. The show
security-profile
output displays the configured parameters of the security profile.
Example
The following example deletes the RF profile named wep-secure:
delete security-profile wep_secure
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
name Specifies the name of an existing RF profile to be deleted.