160 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Managing the Switch
configure web login-timeout
configure web login-timeout <seconds>
Description
Configures the timeout for user to enter username/password in the pop-up window.
Syntax Description
Default
30 seconds.
Usage Guidelines
The Show for this parameter is displayed by using the following command:
show management
Example
The following command configures the interval timer:
configure sntp-client update-interval 30
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
seconds Specifies an interval in seconds, where <seconds> can range from 30
seconds to 10 minutes (600 seconds).
To Next Page
Loading...