570 ExtremeWare Software 7.3.0 Command Reference Guide
SLB Commands
enable slb proxy-client-persistence
enable slb proxy-client-persistence
Description
Enables proxy client persistence.
Syntax Description
This command has no arguments or variables.
Default
Proxy client persistence is disabled by default.
Usage Guidelines
To disable proxy client persistence, use the following command:
disable slb proxy-client-persistence
Example
The following command enables proxy client persistence:
enable slb proxy-client-persistence
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...