1844 ExtremeWare Software 7.3.0 Command Reference Guide
MPLS Commands
show mpls rsvp-te path
show mpls rsvp-te path {<path_name>} {detail}
Description
Displays the RSVP-TE routed path.
Syntax Description
Default
N/A.
Usage Guidelines
This command displays the configuration and status information for MPLS RSVP-TE routed paths.
Information is listed in tabular format and includes the path name, path endpoint LSR IP address, and
local VLAN (if configured). If the path endpoint is specified as a host name, the host name and the DNS
resolved IP address are both displayed. If a specific path name is specified, only information for the
specified path is displayed. If you specify the optional
detail
keyword, the list of subobjects specified
for the explicit route object and any LSPs that are configured to use the path are displayed.
Example
The following displays information about all RSVP-TE routed paths in detailed format:
show mpls rsvp-te path detail
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
path_name Specifies the name of the path.
detail Specifies to display the information in detailed format.
To Next Page
Loading...
Need help?
General
