1766 ExtremeWare Software 7.3.0 Command Reference Guide
MPLS Commands
configure mpls delete vpls
config mpls delete vpls [<vpls_name> | all]
Description
Deletes the VPLS with the specified vpls_name.
Syntax Description
Default
N/A.
Usage Guidelines
This command deletes the VPLS with the specified
vpls_name.
All VC-LSPs established to VPLS peers
are terminated. The all keyword may be used to indicate that all VPLS instances are to be deleted.
Example
config mpls delete vpls myvpls
History
This command was first available in an ExtremeWare 7.3.
Platform Availability
This command is available on the BlackDiamond switch.
vpls_name Identifies the VPLS within the switch (character string)
all Marks all VPLS for deletion.
To Next Page
Loading...