configure slb gogo-mode tcp-port-check timer
ExtremeWare Software 7.3.0 Command Reference Guide 489
configure slb gogo-mode tcp-port-check timer
configure slb gogo-mode <port number> tcp-port-check timer [ftp | http |
https | imap4 | ldap | nntp | pop3 | smtp | socks | telnet | tftp | web |
www | <TCP port number>] frequency <seconds> timeout <seconds>
Description
Overrides the global TCP-port-check frequency and timeout values.
Syntax Description
Default
The default frequency is 30 seconds.
The default timeout is 90 seconds.
Usage Guidelines
This command affects only the specified GoGo mode group.
To set the global TCP-port-check frequency and timeout, use the following command:
configure slb global tcp-port-check
The frequency must be less than the timeout.
port number Specifies the GoGo mode master port.
ftp Specifies the FTP TCP-port-check.
http Specifies the HTTP TCP-port-check.
https Specifies the HTTPS TCP-port-check.
imap4 Specifies the IMAP4 TCP-port-check.
ldap Specifies the LDAP TCP-port-check.
nntp Specifies the NNTP TCP-port-check.
pop3 Specifies the POP3 TCP-port-check.
smtp Specifies the SMTP TCP-port-check.
socks Specifies the SOCKS TCP-port-check.
telnet Specifies the telnet TCP-port-check.
tftp Specifies the TFTP TCP-port-check.
web Specifies the Web TCP-port-check.
www Specifies the www TCP-port-check.
TCP port number Specifies a TCP port for the TCP-port-check.
frequency Specifies the frequency of the TCP port check. The range is 5 to 120 seconds.
timeout Specifies the timeout of the TCP port check. The range is 5 to 300 seconds.