Extreme Networks ExtremeWare - Show Mpls Vpls Nodes

show mpls vpls nodes
ExtremeWare Software 7.3.0 Command Reference Guide 1983
show mpls vpls nodes
show mpls vpls {summary | detail | <vpls_name> {detail | | peer
[<ipaddress> | <host_name>]} | peer [<ipaddress> | <host_name>] {detail}}
Description
Displays information about all the nodes in the H-VPLS network.
Syntax Description
Default
N/A.
Usage Guidelines
This command displays information about all the nodes in the H-VPLS network. When the optional
vpls_name is specified, only VPLS nodes that are members of the VPN as specified by vpls_name are
displayed. If
vpls_name is omitted, information pertaining to all VPLS nodes is displayed. Information
displayed includes IP address of each node, MAC address of each node, VPN ID, and immediate or
remote node indication.
Example
None.
History
This command was first available in an ExtremeWare 7.3.0.
Platform Availability
This command is available on the BlackDiamond switch.
vpls_name Specifies the VPLS nodes that are members of the VPN.
ipaddress Displays all VPLS instances of which the peer is a member, as specified.
host_name Displays all VPLS instances of which the peer is a member, as specified.