delete stpd
ExtremeWare Software 7.3.0 Command Reference Guide 1025
delete stpd
delete stpd <spanning tree name>
Description
Removes a user-defined STPD from the switch.
Syntax Description
Default
N/A.
Usage Guidelines
If you remove an STPD, the VLANs that were members of that STPD are also deleted. An STPD can
only be removed if all VLANs have been deleted from it.
The default STPD, s0, cannot be deleted.
Example
The following command deletes an STPD named purple_st:
delete stpd purple_st
History
This command was first available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
spanning tree name Specifies a user-defined STPD name on the switch.
To Next Page
Loading...